Modern-day wind turbines are constructed using mostly concrete and steel, topped by the fiberglass composite blades mounted to the nacelle that houses the gearbox and generator, along with much of the control systems. With the ever increasing sizes of these turbines transporting the components to the installation location is a harrowing task, something which Swedish company Modvion claims to improve upon with its wooden tower elements that come mostly packaged flat, for on-site assembly. The BBC recently [took a look at the first](https://www.bbc.com/news/science-environment-67718719) of these partially wooden wind turbine towers. At 105 meters tall, it [features](https://modvion.com/projekt/wind-of-change/) a standard V90-2.0MW turbine and blades. Rather than using concrete slabs at the base with steel tower segments on top, or a fully steel tower like with most wind turbines, Modvion uses segments of layered wood which it calls ‘ [the module](https://modvion.com/the-product/)‘. These are assembled out of 144 layers of 3 mm thick spruce, with ring segments assembled on-site. This means that multiple of these modules can be stacked onto a standard truck with no concerns that come with oversized transports. According to Modvion these wooden towers should last about the same number of years as their steel counterparts. [Where some of the claims made by Modvion fall somewhat flat is that it solves the whole wind turbine transport problem, as their solution does not fix the ](https://hackaday.com/wp-content/uploads/2023/12/132119709_emissionsintensity_noccs-nc.png) [most daunting issue](https://www.energy.gov/eere/wind/infrastructure-and-logistics) of transporting wind turbine blades. They also claim that using wood instead of steel makes their wind turbine tower section ‘carbon negative’ due to capturing carbon in the wood, with the same wood ‘reusable’ after decommissioning by reusing it for buildings. This would reduce wind power’s already small carbon footprint. The issue here is of course that the steel in most wind turbine towers can be almost fully recycled and reused, whether to make new wind turbine towers or something else. Melting steel can also be done using zero-carbon energy sources, with the world’s steel industries gradually shifting to such ‘green steel’. Although Modvion seems very upbeat about the prospects of their wooden towers, it remains to be seen whether it doesn’t turn into another [Spruce Goose](https://en.wikipedia.org/wiki/Hughes_H-4_Hercules?useskin=vector).
